HDMI Extender over CAT5/6 up to 200ft. (60m)

The KanexPro Long-Runner employs HDBaseT technology to route high-resolution HDMI signals from the source up to 330 feet (100m) to your HD display. It supports full 3D with resolutions up to 4Kx2K (4 times the 1080p), multi-channel audio and IR extension over a single low cost CAT5e/6 cable.

Fully compliant with HDCP, EDID and CEC controls, the Long-runner HDMI extender is an ideal solution for HDMI extension over long distances.

Features

Extend HDMI signals up to 330 ft. (100m) on single CAT5e cable

Infrared Signal Input/Output, embedded over extension

Supports resolutions from 1080p/60@48bit to 4Kx2K

Supports data rates up to 10.2 Gbps

Enables 3D pass-through

Supports CEC pass-through

HDCP and EDID compliant

Audio support: Dolby TrueHD & DTS Master Audio, 7.1 compliant

Uncompressed audio support such as LPCM

Front panel-LEDs for link activity and HDCP authentication

External power supplies included

NOTE: Do not use Shielded Twisted Pair cable (STP), to avoid significant drop in performance. Pre-terminated CAT6 (UTP) cables are recommended for optimal results.

The KanexPro Long-Runner 5PL employs HDBaseT¨ technology to route high-resolution HDMI¨ signals with full HD 1080p and multi-channel audio from the source up to 330 feet (100m) to your HD display. In addition, it supports PoE (Power over Ethernet) eliminating excess or unwanted power drain and also provides power to the receiver at the remote location, giving the ultimate freedom to the display or projector from being tethered to the AC outlet.

It provisions full 3D (all formats) and resolutions up to 4Kx2K (4 times the 1080p) with multi-channel audio, IR and RS-232 extension over a single low cost CAT5e/6 cable. Fully compliant with HDCP, EDID and CEC controls.The Long-runner 5PL can be easily controlled with RS-232 control ports.

Extends Ethernet to connected TVs for online access and provides IR back channel to control A/V sources using the same CAT6 cable extension. With the built-in IR blaster, simply point the IR remote(s) at the display to control the Hi-Def. sources as if they were located in the same room as the display.

The Long Runner 5PL includes all the five elements: Audio, Video, Power, Control, and the Distance needed for versatility and swift installation. Guaranteed to work with any number of HDMI sources and displays. Ideal for use with home-theater, digital signage, hospitality and medical imaging applications.

Features

Extend HDMI signals up to 330 ft. (100m) on single CAT6 cable

Infrared signal Input/Output, embedded over extension

Integrated Ethernet port for LAN/ network device

Supports resolutions from 1080p/60@48bit to 4Kx2K

Auto-adjustment for buffering, equalization and amplification

Supports data rates up to 10.2 Gbps

Enables 3D pass-through

Supports CEC pass-through

HDCP and EDID compliant

Audio support: Dolby TrueHD & DTS Master Audio, 7.1 compliant

Uncompressed audio support such as LPCM

RS-232 control (optional TCPRS2 over IP) perfect for third-party control systems

Front panel-LEDs for link activity and HDCP authentication

External power supply included for the Transmitter

The KanexPro Long-Runner 5PL employs HDBaseT¨ technology to route high-resolution HDMI¨ signals with full HD 1080p and multi-channel audio from the source up to 330 feet (100m) to your HD display. In addition, it supports PoE (Power over Ethernet) eliminating excess or unwanted power drain and also provides power to the receiver at the remote location, giving the ultimate freedom to the display or projector from being tethered to the AC outlet.

It provisions full 3D (all formats) and resolutions up to 4Kx2K (4 times the 1080p) with multi-channel audio, IR and RS-232 extension over a single low cost CAT5e/6 cable. Fully compliant with HDCP, EDID and CEC controls.The Long-runner 5PL can be easily controlled with RS-232 control ports.

Extends Ethernet to connected TVs for online access and provides IR back channel to control A/V sources using the same CAT6 cable extension. With the built-in IR blaster, simply point the IR remote(s) at the display to control the Hi-Def. sources as if they were located in the same room as the display.

The Long Runner 5PL includes all the five elements: Audio, Video, Power, Control, and the Distance needed for versatility and swift installation. Guaranteed to work with any number of HDMI sources and displays. Ideal for use with home-theater, digital signage, hospitality and medical imaging applications.

Features

Extend HDMI signals up to 330 ft. (100m) on single CAT6 cable

Infrared signal Input/Output, embedded over extension

Integrated Ethernet port for LAN/ network device

Supports resolutions from 1080p/60@48bit to 4Kx2K

Auto-adjustment for buffering, equalization and amplification

Supports data rates up to 10.2 Gbps

Enables 3D pass-through

Supports CEC pass-through

HDCP and EDID compliant

Audio support: Dolby TrueHD & DTS Master Audio, 7.1 compliant

Uncompressed audio support such as LPCM

RS-232 control (optional TCPRS2 over IP) perfect for third-party control systems

Front panel-LEDs for link activity and HDCP authentication

External power supply included for the Transmitter

Today's advanced fast ethernet and gigbit computer networks require Enhanced Category 5 high-speed cabling to distrubute data, voice and video. HomeAvCables's Enhanced Cat5 350Mhz Snagless Patch Cables will keep you ahead of the game. These cables will handle bandwidth intensive applications up to 350 Mhz and beyond. Each comes UL verified to meet all Cat 5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire! This is accomplished by bonding together each of the individual pairs, helping to maintain the twist-spacing throughout the line right up to your termination point. Constructed with high-quality wire and a shortened body plug will keep Near-end Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. HomeAvCables 350Mhz Snagless Patch cables are available in a variety of colors to easily color-code your network installation.

• Connector: 50-micron gold plated RJ-45 Male to Male
• Conductor: 4-pair 24 AWG Stranded Copper
• Jacket: PVC
• Molded, Snag-Free boot prevents unwanted cable snags
• Applications:
  • 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3)
  • 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN
  • 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM
  • Voice
• Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications
• Exceeds Category 5e specifications
• Wired: TSB 568B (AT&T 258A)
• Certifications: TIA/EIA; UL Listed

Today's advanced fast ethernet and gigbit computer networks require Enhanced Category 5 high-speed cabling to distrubute data, voice and video. HomeAvCables's Enhanced Cat5 350Mhz Snagless Patch Cables will keep you ahead of the game. These cables will handle bandwidth intensive applications up to 350 Mhz and beyond. Each comes UL verified to meet all Cat 5e TIA/EIA standards, and drastically reduce both impedance and structural return loss (SRL) as compared to standard 100 Mhz wire! This is accomplished by bonding together each of the individual pairs, helping to maintain the twist-spacing throughout the line right up to your termination point. Constructed with high-quality wire and a shortened body plug will keep Near-end Crosstalk (NEXT) levels to a minimum. The molded, snag-free boot prevents unwanted cable snags during installation and provides extra strain-relief. HomeAvCables 350Mhz Snagless Patch cables are available in a variety of colors to easily color-code your network installation.

• Connector: 50-micron gold plated RJ-45 Male to Male
• Conductor: 4-pair 24 AWG Stranded Copper
• Jacket: PVC
• Molded, Snag-Free boot prevents unwanted cable snags
• Applications:
  • 1000 BASE-T; 100 BASE-T; 10 BASE-T (IEEE 802.3)
  • 4/16 Mbps Token Ring (IEEE 802.5); 100 VG-AnyLAN
  • 100 Mbps TP-PMD (ANSI X3T9.5); 55/155 Mbps ATM
  • Voice
• Designed For: Network Adapters, Hubs, Switches, Routers, DSL/Cable Modems, Patch Panels and other twisted-pair applications
• Exceeds Category 5e specifications
• Wired: TSB 568B (AT&T 258A)
• Certifications: TIA/EIA; UL Listed