The KanexPro DVI Extender is a transmitter and receiver set engineered to send single link DVI-D signals considerably beyond the limits of standard DVI/ HDMI cables. It extends using two inexpensive Cat 5e, 6 or 7 cables up to 164 ft. (50m). The extender transmits digital video and multi-channel audio from DVI equipped source to DVI/ HDMI enabled displays providing full internal HDCP management and EDID protocol. Transmit & extend high-resolution DVI/ HDMI signals up to 164ft (50m) Supports bandwidth up to 10.2 Gbps Built-in EDID & HDCP internal management HDCP complaint Supports High Speed HDMI Specifications (Deep Color, Lip Sync and HD lossless audio formats) Supports full HD 1080p (1920x1080@60Hz) Computer resolutions up to WUXGA (1920x1200@60Hz) Supports DDC transmission Automatic gain compensation and equalization Front-panel LEDs for link activity Table/ Wall-mountable aluminum enclosure Internal Universal power adaptable (100Volt-240Volt AC, 50/60Hz) Backed by KanexPro's 3-Year full parts & labor warranty
The KanexPro DVI extender also features built-in auto-sensing function that automatically adjusts the signal level depending on the transmission distance. Ideal for space-challenging applications where distance is an issue, when extending DVI/HDMI signals over Cat 5e/6.
Transmitter: Input: 1 x DVI-D input Output: 2 x RJ45 Input Connector: DVI-D connector, female Output Connector: 2 x RJ45 per unit for 2 CAT 5/5e/6 or STP(shielded twisted pair) Video Signal: DVI 1.0 (compatible with HDMI 1.3) Video Signal: TIA/EIA T 568A or T 568B. Pin configurations for each standard are available in the manual's installation chapter Digital Audio: Supports HDMI audio transmitted through the RGB and Y, Cr, Cb lines, actively buffered. Transmittion Mode: Audio/Video sync-transmission Receiver: Input: 2 x RJ45 Output: 1 x DVI-D output Input Connector: 2 x RJ45 per unit for 2 CAT 5/5e/6 or STP(shielded twisted pair) Output Connector: DVI-D connector, female Video Signal: Supports both termination standards: TIA/EIA T 568A or T 568B. Video Signal: DVI 1.0(HDMI 1.3) Digital Audio: Supports HDMI audio transmitted through the RGB and Y, Cr, Cb lines, actively buffered Transmission Mode: Audio/Video sync-transmission
General: Resolution Range: 800x600 - 1920x1200 (Max.) Transmission Distance Maximum distrance: 164 feet (50m) Gain: 0dB~10dB @ 100MHz Differential Phasic Erro: ±10¡ @ 135MHz_100M SNR: >70dB@ 100MHz-100M Frequency Respond: 20Hz to 20KHz,±1dB Return Lost: <-30dB@5KHz THD: <0.005%@1KHz Differential Gain: Erro ±3dB @ 135MHz Min. ~Max.Level: <0.3V to 1.45Vp-p Differential Phasic Erro: ±10¡@ 135MHz-100M Impedance: 75 ohms Temperature: -20¡ ~ +60¡C Humidity: =<95%(no frost ) Power Supply: 100VAC ~ 240VAC, 50/60Hz Case Dimension: W3 x H1 x D3.4 in