Belden 9451DP Double Twisted Pair Flamarrest 22AWG Cable 1000ft
Number of Pairs: 2
Total Number of Conductors: 4
AWG: 22
Stranding: 7x30
Conductor Material: TC- Tinned Copper
Insulation Material: FEP Fluorinated Ethylene Propylene
Outer Shield Material Trade Name: Beldfoil
Outer Shield Material: Aluminum Foil- Polyester Tape
Outer Jacket Material Trade Name: Flamarrest
Outer Jacket Material: Low Smoke Polyvinyl Chloride
Plenum: Yes
Applications: Line Level Analog Audio Cable, Double-Pair Cables, Audio, Control and Instrumentation Cables.
| | | | |
Retail Price: $1.99 Our Price: $0.99 3.5mm Stereo Male Gold Solder Connector
Molded Spring Relief
Solder type with Gold plated housing
cable O.D.0.16in
Also called 1/8in connector | | Retail Price: $3.99 Our Price: $2.99 Calrads 75OHM Gold Plated Solder Connector. Perfect for Component, Composite or Audio connections.
- Boot sized for RG179 / RG174 Cable (2.8mm)
- RG59 cable fits with boot removed
| | Retail Price: $0.20 Our Price: $0.14 22 Awg Plenum jacket 4 conductor with Shield and Drain Wire. UL listed & CL3 rated. Cut to your length, max 1000ft. |
| | |
Retail Price: $5.99 Our Price: $3.99 Neutrik XLR Cable Connector. Silver 3-Pin Female. The worldwide accepted standard. Rugged diecast shell, rear insert, robust and compact design (shortest available XLR cable connector). Time saving assembly: only 4 pieces, no set screws. Neutrik unique chuck-type strain relief. UL recognized component.
- TECHNICAL DATA
- Electrical
- Number of contacts: 3
- Contact resistance: : ≤ 3 m ohms
: ≤ 3 m Insulation resistance
- initial: > 2 G
- after damp heat test: > 1 G
- Dielectric strength: 1500 V dc
: ≤ 3 m Rated current: 10 A
: ≤ 3 m AWG: 1.5 mm²/16 AWG
Capacitance between contacts: : ≤ 7 pF
- Mechanical
- Lifetime: >1000 cycles
- Insertion / withdrawal force: ≤ 20 N
- Cable O.D. range: 3.5 mm - 8.0 mm
- Materials
- Shell: ZnAl4Cu1, gal Ni over Cu plating
- Insert: PA 6.6 30% GR (glass reinforced)
- Contacts: CuZn39Pb3
- Contact surface: gal 2 µm Ag
- Latch lock (female): St3K32
- Strain-relief clamp: POM
- Antikink bushing: PUR
- Environmental
- Temperature range: -30° C to + 80° C
- Flammability: UL 94HB
- Solderability: complies with IEC 68-2-20
- Compatibility / Remarks
- Compatibility: IEC tentative standard & Switchcraft® & Cannon XLR
| | Retail Price: $5.99 Our Price: $3.99 Neutrik XLR Cable Connector. Silver 3-Pin Male. The worldwide accepted standard. Rugged diecast shell, rear insert, robust and compact design (shortest available XLR cable connector). Time saving assembly: only 4 pieces, no set screws. Neutrik unique chuck-type strain relief. UL recognized component.
- TECHNICAL DATA
- Electrical
- Number of contacts: 3
- Contact resistance: : ≤ 3 m ohms
: ≤ 3 m Insulation resistance
- initial: > 2 G
- after damp heat test: > 1 G
- Dielectric strength: 1500 V dc
: ≤ 3 m Rated current: 10 A
: ≤ 3 m AWG: 1.5 mm²/16 AWG
Capacitance between contacts: : ≤ 7 pF
- Mechanical
- Lifetime: >1000 cycles
- Insertion / withdrawal force: ≤ 20 N
- Cable O.D. range: 3.5 mm - 8.0 mm
- Materials
- Shell: ZnAl4Cu1, gal Ni over Cu plating
- Insert: PA 6.6 30% GR (glass reinforced)
- Contacts: CuZn39Pb3
- Contact surface: gal 2 µm Ag
- Latch lock (female): St3K32
- Strain-relief clamp: POM
- Antikink bushing: PUR
- Environmental
- Temperature range: -30° C to + 80° C
- Flammability: UL 94HB
- Solderability: complies with IEC 68-2-20
- Compatibility / Remarks
- Compatibility: IEC tentative standard & Switchcraft® & Cannon XLR
|
